196°C에서 420°C까지 교정되며, 모델 5613은 300°C까지 교정됩니다. 빠른 응답 속도와 센서의 직경 그리고 측정부의 깊이에 문제가 발생된다면, 이 센서들은 적절한 선택이 될 것입니다. 정밀급 백금 저항 온도계로서, 다용도로 사용할 수 있는 온도 센서입니다. 고정 표준실 또는 현장 교정 시에 사용하기가 매우 편리합니다. Specifications Temperature range 5615-12 and 5615-9: –200 °C to 420 °C 5615-6: –200 °C to 300 °C Nominal resistance at 0 °C 100 Ω ± 0.10 Ω Temperature coefficient 0.0039250 Ω/Ω/°C Accuracy[1] ± 0.024 °C at –200 °C ± 0.012 °C at 0 °C ± 0.035 °C at 420 °CC Short-term repeatability[2] […]
정밀급 백금 저항 온도계로서, 다용도로 사용할 수 있는 온도 센서입니다. 고정 표준실 또는 현장 교정 시에 사용하기가 매우 편리합니다.
Specifications |
|
| Temperature range |
5615-12 and 5615-9: –200 °C to 420 °C 5615-6: –200 °C to 300 °C |
| Nominal resistance at 0 °C | 100 Ω ± 0.10 Ω |
| Temperature coefficient | 0.0039250 Ω/Ω/°C |
| Accuracy[1] | ± 0.024 °C at –200 °C ± 0.012 °C at 0 °C ± 0.035 °C at 420 °CC |
| Short-term repeatability[2] | ± 0.009 °C at 0.010 °C |
| Drift[3] | ± 0.007 °C at 0.010 °C |
| Sensor length | 28 mm (1.1 in) |
| Sensor location | 6.9 mm ± 3.3 mm from tip (0.27 in ± 0.13 in) |
| Sheath dimensions | 5615-6: 152 mm x 4.76 mm (6.0 in x 0.188 in) 5615-9: 229 mm x 4.76 mm (9.0 in x 0.188 in) 5615-12: 305 mm x 6.35 mm (12.0 in x 0.250 in) |
| Sheath diameter tolerance | ± 0.127 mm (± 0.005 in) |
| Sheath material | Inconel™ 600 |
| Minimum insulation resistance | 1000 MΩ at 23 °C |
| Transition junction temperature range[4] | –50 °C to 200 °C |
| Transition junction dimensions | 71 mm x 13 mm dia (2.8 in x 0.5 in) |
| Maximum immersion length | 5615-6: 102 mm (4 in) 5615-9: 178 mm (7 in) 5615-12: 254 mm (10 in) |
| Response time[5] | 9 seconds typical |
| Self heating (in 0 °C bath) | 50 mW/°C |
| Lead-wire cable type | PTFE insulated with PTFE jacket, 22 AWG |
| Lead-wire length | 183 cm (72 in) |
| Lead-wire temperature range | –50 °C to 200 °C |
| Calibration | NVLAP-accredited calibration included, lab code 200706-0. Please see calibration uncertainty table and its explanation of changeable uncertainties. |
| [1] Includes calibration and 100 hr drift (k=2)
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2) [3] After 100 hrs at max temp, 95 % confidence (k=2) [4] Temperatures outside this range will cause irreparable damage. For best performance, transition junction should not be too hot to touch. [5] Per ASTM E 644 |
|
